Skip to main content

Things that usefull to know for a first run of the radar

Guides to follow:

  1. https://dev.ti.com/tirex/explore/node?node=A__AT6oz7HNqWRLLbuHoF6SQg__radar_toolbox__1AslXXD__LATEST
  2. https://dev.ti.com/tirex/explore/content/radar_toolbox_3_20_00_04/software_docs/using_uniflash_with_mmwave.html
  3. https://dev.ti.com/tirex/explore/node?node=A__ARxIPQ7e.hg36tX5P5ntTg__radar_toolbox__1AslXXD__LATEST For uni flash make sure you use the Class/User UART port (number can be found in he devise manager under the section Ports (COM & LPT)) If doesn’t work try: close and open UniFlash, check switches config and press reset button. Uni flash must be open when radar disconnected from a computer. Folder with all needed configs and binaries: C:\ti\radar_toolbox_3_20_00_04\source\ti\examples\Industrial_and_Personal_Electronics\Motion_and_Presence_Detection\Motion_and_Presence_Detection Switches config: https://dev.ti.com/tirex/explore/content/radar_toolbox_3_20_00_04/hardware_docs/evm_setup_operational_modes.html